• Is Cisco FirePower Compatible with Zerto?
    • VMware to Hyper-V MOVE leaves VM in a non HA state

      Hi, When we MOVE VM’s using Zerto 6.5U1 onto Hyper-V the resulting VM’s are left in a state that precludes them from HA live migration internally on the Cluster. The reason for this seems to be that “Expected utilization” during Live Migration is set to some  weird values. When we restore the “Expected Utilization” to […]

      in: Cross-Hypervisor

    • People: 2
      Replies: 1
    • November 28, 2018
    • VRA issue post VRA VMDK migration to another LUN

      Team, Greetings, We have enabled SDRS to VM disks, VRA disks are getting migrated to other LUNS and due to this the VRA is not getting started once its powered off.  I need to disable the VRA VM SDRS level setting to “Disable” state to prevent this. Please suggest if any faced this issue and […]

      in: VMware

    • People: 2
      Replies: 1
    • November 28, 2018
    • Can We Limit Alert Percentages?

      We turned on e-mail alerts and we get a lot of messages that say “VPGNAME exceeds configured RPO of 15 minutes by more than 25%”.  Is there any way to limit the value so we don’t get messages that are below 50%?  This problem always self corrects before we can even do anything about it […]

      in: General Discussion

    • People: 2
      Replies: 1
    • November 28, 2018
    • Zerto and Ansible

      I’m looking at end-to-end automation for our DR solution (admittedly there will be some manual steps). Is anyone aware of any work whether by Zerto or a friendly individual in the community who has created any ansible modules for Zerto? I thinking of the following modules (if they exist); zerto_vpg zerto_vpg_host zerto_vpg_failover zerto_vra Thanks TOby

      in: Scripting and APIs

    • People: 2
      Replies: 1
    • November 28, 2018
    • How to Set static MAC to VPG with Multiple VMs

      Could anyone can help to Powershell or API to set VPG with Multiple VMs. Customer demand specific MAC to their Every VMs. NAC is controlling MAC so customer want to specify MAC to Every VMs they want to protect. Zerto do have dynamic MAC change allowed but not static MAC change. Thank you in advance.

      in: Scripting and APIs

    • People: 2
      Replies: 1
    • November 28, 2018
    • V2V migration testing before final sync up

      I want to know if Zerto has the feature which we require during V2V migration. Presently, we are doing migration of virtual machines on VMware from source Datacenter to target data center, using Zerto. Both source DC and target DC are located far away , in two different cities in US. We have good connectivity between […]

      in: General Discussion

    • People: 2
      Replies: 1
    • November 27, 2018
    • Can Retention recover at any time?

      For example, Main & DR sites are destoryed for any reason and I wanna recover the VMs with using Retention. Can I recover VMs?   On my labs, I failed to recover using Retention folders(backups, images, pools, etc.)  after ZVM 6.5 reinstalled.

      in: VMware

    • People: 2
      Replies: 1
    • November 27, 2018
    • ZVM Syslog Intergration with nxLog

      Hi together We have successfully implemented to sending logs from Zerto Virtual Manager to our Graylog Syslog Infrastructure. We have done this with nxlog and its csv extension. It is working fine except for one issue: All 10 minutes the ZVM writes multiline messages to the csv log (C:\Program Files\Zerto\Zerto Virtual Replication\logs): 00000000,00000000,18-04-27 13:48:42.31,I,389,VraInUseMapper,<.ctor>b__7_0,Begin Method: […]

      in: General Discussion

    • People: 2
      Replies: 1
    • November 27, 2018
    • SQL Server Indexing

      All, We have a SQL Cluster consisting of 2 nodes, active/passive. We have followed the best practices guide and have configured the servers with an operating system disk, tempdb, paging, data, logging disks. The tempdb and paging disks are set to temporary disks. When nightly indexing happens, we see massive amounts of changes that our […]

      in: General Discussion

    • People: 2
      Replies: 1
    • November 19, 2018
    • ZVM protected with FT

      Hi, Can I protect the ZVM with Fault Tolerance? I have two DC’s on either side of my building – we run half our workload in one and half in the other. Zerto protects some workload between the rooms. The hosts in the two rooms are all in the one vCenter – giving us the […]

      in: VMware

    • People: 2
      Replies: 6
    • November 14, 2018
    • API Perl Script Debugging help

      Just Start Perl API Program Yesterday Could Someone help me? Weird Error shows and couldn’t figure it out. I have tried to directly ask to ZVM server and it worked well. Although this script do not include login procedure(I could not figured it out yet ) Thank you in advance. ———–Error————- perl ZertoRetrieveAllvpgInfo.pl syntax error […]

      in: Scripting and APIs

    • People: 2
      Replies: 2
    • November 13, 2018
    • issues after Palo-Alto firewall installation

      since we put a Palo-Alto “intelligent” firewall in our target site, i’m seeing a huge number of site disconnect events followed within seconds of a reconnect message. the issue is almost certainly with the firewall config but wondering if any one has seen an issue like this before. my network guy is stumped. e.g. <span […]

      in: General Discussion

    • People: 4
      Replies: 9
    • November 12, 2018
    • VPG Settings API Server Error

      Hi, Request Information URL/Endpoint: https://hostname:9669/v1/vpgSettings Method: POST Body: {“VpgIdentifier”:”a2f8d9b5-4504-4217-843a-f9556f4c8968″} Headers: {x-zerto-session: “session id”} I am getting the error mentioned below ” Request Error The server encountered an error processing the request. Please see the service help page for constructing valid requests to the service “ I believe this error is being caused by Bad request. I am […]

      in: Scripting and APIs

    • People: 2
      Replies: 1
    • November 11, 2018
1 2 3 … 83 84 85 … 119 120 121